Location: Home Page > Article Article
How to let CPU lock max turbo frequency? How to block cpu turbo frequency
Turbo Frequency is an accelerated acceleration technology launched by Intel. Turbo frequency is a kind of intelligent overclocking. After starting program, processor automatically accelerates to appropriate frequency, which is 10-20 times faster than previous one. speed.% to better ensure smoothness of program. The difference from custom overclocking is that usually turbo frequency is adjusted in a safe range, so computer cannot be unstable, so many users want to fix turbo frequency and keep it fixed at maximum core frequency. How to let CPU lock max turbo frequency? Let me share with you how to lock cpu turbo frequency.

Note: Before CPU locks maximum turbo frequency, we must make sure that CPU heatsink can withstand pressure. It is recommended to use a CPU heatsink worth at least 100 RMB for air cooling.
Required tools: ThrottleStop v8.50 (download from Baidu)
1. First, we open downloaded ThrottleStop (a program for modulating frequency of processor). If maximum turbo frequency of our processor is 3.5, then we need to check "Set multiplier" option and adjust value to 3.5T. If computer's cooling status is poor, it is recommended to check "BD PROCHOT" and then click "SAVE" button to save settings. We click "Enable" again and at this time it becomes "Off", indicating that it has been turned on. If it's off, we can click again.

2. If your processor is a 4th generation quad-core processor, you can continue with following steps. If you do not completely ignore it, press FIVR after completing above steps, and you will enter interface as shown below.

To find out value of active core, refer to maximum frequency of your processor in turbo mode. If maximum frequency in turbo mode is 3.3GHz, set it to "33", then click "CPU core", and then adjust "offset voltage", voltage adjustment from small to Normally, this series CPU case can withstand voltage of about "-75 mV".
The above operations can reduce CPU power consumption, stabilize CPU turbo frequency, and prevent frequency drop due to overheating in game, which will lead to issues such as game freezing and frame drops. Therefore, it is recommended that beginners do not reduce too much. Little by little blue screen of death in test is a normal problem. After restarting computer, slowly reduce CPU voltage until game becomes normal.
If you open ThrottleStop software and get a "CPU not supported" message, this means that your processor does not support your processor screen lock and you can replace it with other versions of ThrottleStop software.

The above is method of sharing CPU turbo frequency. We can use ThrottleStop software to lock maximum turbo frequency of CPU. Remember that you don't know maximum turbo frequency of your CPU. You can search for the CPU model. online to check turbo frequency parameters. , do not install blindly.
Related Blogs
- How to let CPU lock max turbo frequency? How to block cpu turbo frequency
- Zanji how to choose appropriate memory frequency? Business won't tell you these secrets
- What should I do if my computer's CPU usage is high? How to reduce computer CPU usage
- What to do if CPU cooler fan is not spinning? Three Ways to Solve a CPU Fan Not Spinning
- Notes to Installed Users: A Guide to Five Misunderstandings When Choosing a CPU Cooler
- cpu fan error, press f1 to run install solution
- What is more important, processor frequency or number of cores? Which is better for a computer processor to have a higher fundamental frequency or multi-core?
- When buying a processor, pay attention to main frequency or the number of cores?
- How to install a computer hard drive? How to install two hard drives on a computer
- How to protect your hard drive from bad sectors? How to prevent computer hard drive damage